How to Stop a Swivel Recliner from Swiveling

by Andrew Smith| Last Updated: February 9, 2022

Disclosure: This site is reader-supported & contains affiliate links. We may earn a commission through products purchased using links on this page. Learn more

How to Stop a Swivel Recliner from Swiveling

A swivel chair that doesn’t constantly rotate lessens the amount of strain on your body. It also lowers the number of times you have to move around due to proximity to the chair’s back.

Besides, the continual mobility of your backrest accelerates the wear and tear of your recliner since it creates extra friction.

Learn how to stop a swivel recliner from swiveling in straightforward steps below and avoid these problems.

You can stop a swivel recliner from swiveling using a few tools. You lock a swivel chair by screwing the chair’s base and the swivel base together. Alternatively, you stabilize a swivel recliner by inserting a wedge, using tape, glue, rubber band, sticky pads, drilling, and rubber cement.

Table of Contents

Can You Stop a Swivel Recliner from Swiveling?

Deactivating the swivel feature prevents the chair from rotating, leaving only your recliner and footrest in use. If the swivel rocker recliner is too close to nearby furniture, you may want to disable its swivel.

So, if swiveling becomes an issue, you can tweak the recliner to stop it from turning. A few simple tools are necessary to keep your swivel chair from turning.

How to Stop a Swivel Recliner from Swiveling

Various hacks can help you stop your swivel recliner from swiveling. Some are super simple, while others require a bit of DIY enthusiasm.

How Do You Lock a Swivel Chair?

The procedure entails screwing the chair’s base together. The instructions may differ depending on the model of your recliner.

How Do You Stabilize a Swivel Recliner?

Typically, one wedge is adequate to stop the swivel. However, insert another on the pole’s opposite side if necessary.

Additional Methods to Stop a Swivel Recliner from Swiveling

  1. Use tape: Tape the recliner’s swiveling leg. It enhances friction between the recliner and the floor.
  2. Use Rubber Bands: The grip offered by elastic bands is far superior to tape. Wrap the bands around your recliner’s legs. Have them in an X pattern. These provide adequate restraint similar to brake pads on a wheel.
  3. Drilling: Drill two loops and hooks into your desk’s underside. Insert a cord through the loops and tie it to your swivel chair.
  4. Use a glue gun: Glue the swivel mechanism around the edges. The non-wearing sealant stops your furniture from swiveling and is hard to break.
  5. Sticky pads: Buy adhesive pads that fit your chair’s size and model. These pads are simple to install and provide a lasting solution.
  6. Rubber cement: This is a less durable sticky pad alternative but helpful if you apply excess pressure on your chair’s swivel mechanism. Plus, it’s significantly less expensive and better than getting a new chair.

Related Articles

How To Make A Rocker Recliner Not Rock
6 Most Comfortable Rocker Recliner In 2022
How To Stop Recliner From Squeaking

Closing Remarks

Less movement in the chair reduces the number of times you need to move in the seat. When your swivel recliner stops moving on its own, it frees up space, so nothing gets snagged underneath or around it.

If you can’t spin your chair, you don’t have to keep it turning and moving. With the guide above on how to top a swivel recliner from swiveling, this should take a few minutes.

Author

  • Andrew Smith

    Andrew Smith is the founder of CozySeating, is a father of 2, and an engineer from one of the leading furniture stores in the country. Due to his 10 years of experience, he has proved to be the best person to offer advice to clients regarding different seating furniture based on their needs and performance. Besides, he is a specialist in product reviews and always keeps up with the current trends in the market.

Leave a Comment

Subscribe
Notify of
guest
0 Comments
Inline Feedbacks
View all comments