How To Take Apart A Lazyboy Recliner

by Andrew Smith| Last Updated: March 29, 2022

Disclosure: This site is reader-supported & contains affiliate links. We may earn a commission through products purchased using links on this page. Learn more

How To Take Apart A Lazyboy Recliner

Are you having difficulties in taking apart your Lazyboy Recliner? And are you looking for an easy way to handle the task? Look no further! 

Disassembling your recliner is necessary when you want to relocate it or do some routine maintenance. So, how to take apart a Lazyboy recliner?  

You can take apart your Lazyboy recliner by carefully disassembling and removing its back. You’ll need to locate the locking brackets, push the locking lever up, and rock the back sideways in an upwards direction and off. Tighten the screws on the two brackets to make your recliner chair more secure.

Find a few actionable steps in this article you can follow to take your Lazyboy recliner apart and install it all by yourself. 

Table of Contents

How To Take Apart A Lazyboy Recliner?

You can take apart your Lazyboy recliner using the step-by-step guide below. While these steps apply to both manual and power recliners, you’ll have to start by disconnecting your chair from the power supply for the power recliner chairs. Lets get started.

  1. Tilt the recliner forward. Place your recliner in a position that it’s resting on the arms while lying on the ground. 
  2. Behind your recliner, identify the locking lever on both sides. 
  3. Put your flat-edged screwdriver between your recliner’s arm and the backrest’s outer side.
  4. Move the screwdriver upwards, pushing the locking lever until it unlocks.
  5. Put your chair back to its original position.
  6. Pull up the backrest as you rock it side to side and then pull it off the unit.

It’s Time To Tighten Loose Screws!

The brackets of your Lazyboy recliner become loose years down the line. One of the reasons why you would want to take your recliner apart is to fasten all the loose screws.

Hence, when you remove the backrest from the unit, it’s an ideal time to check out if there are loose nuts and tighten them. That secures the backrest!  Fasten also any exposed screws on the body’s brackets. The screws hold the backrest intact.

Once you ensure that all screws are well fixed, your backrest is safe from wobbling, and you can re-install your recliner’s back. However, if your aim was to relocate your chair, re-assembling comes later. 

The main reason you want to take your recliner apart is to ease its movement to a different room or location in the same room. It’s, therefore, necessary to look at how to get your chair to its destination safely.

How Do You Move Your Recliner?

You can move your recliner by following a few simple steps. Now that you have your recliner apart, its time to get moving! But wait a minute! This piece of furniture is too heavy. Hence, you need to be creative to move it quickly and safely. 

So, how do you go about it?  Worry not. We’ve got your back!

Ideal Tips When Moving Your Dismantled Recliner 

Let’s look at each of these steps below.

1. Examine The Passageway

Measuring the pathway from different moving positions allows you to compare its width and that of your recliner. Be keen on the floor and walls distance to have an accurate quantification.

Some models like the Lazyboy recliners may have a width that doesn’t match the pathway. The chairs are bulky, so taking your recliner apart is necessary during furniture movement.

2. Set Your Path Straight

Keep aside every obstructive object that could hinder the free movement of your recliner. Such things can cause your stumbling. Consequently, your chair may fall, leading to its damage.

3. Release The Locking Mechanism

Access the backrest’s release locks at the bottom of the recliner rear. You then remove the upper part of the backrest and release it to carry your chair to the new location conveniently. Remember to replace the lock afterward.

4. Align The Bottom Of The Recliner

Set straight the base of your recliner for a smooth movement. It’s also essential to minimize the chances of slippage in the process.

 How? By covering the base of your recliner with a strong plastic sheet. Grip the wraps with tape. 

5. It’s Time To Move

Have a companion to help you transport your heavy recliner. Consider using a cart or a two-wheeler to transport your chair. Place the machine under the bottom of the recliner and get moving. One of you should incline the back while the other raises the front.

Move cautiously to the new location holding the chair tightly to prevent it from any potential damage like falling.

6. Assemble Your Chair

Once you get to the new location, assemble your recliner. The re-installation guidelines below can be very helpful at this point. It’s also advisable to take photos and label parts during dismantling for easy assembling.

Furthermore, you could consider sourcing help from a moving company if your pathway is too complex. The moving experts can help in the assembling and disassembling too. 

How To Re-Install The Backrest Of A Lazy Boy Recliner?

You re-install the backrest of your Lazy boy recliner by following the steps hereunder.

  1. Align the backrest and the body’s brackets while the backrest leans to one side.
  2. Hold the top of the backrest and tilt your recliner towards the front side.
  3. Confirm that the brackets are correctly engaged
  4. Return the locking levers to their usual position by pushing them downwards.
  5. Roll your chair back to the upright posture.
  6. Carefully twist the backrest sideways to test if you’ve got it right.

Also read:

How to Adjust Lazy Boy Recliner
The Ultimate Guide on How to Fix a Lazy Boy Recliner

FAQ

Do All Lazyboy Reclining Sofas Come Apart?

Yes, Lazyboy reclining sofas come apart. You can disassemble your Lazyboy motion sofas that recline by removing their backrest and feet.  Since all the Lazyboy sofas have bolted or screwed feet, it becomes easy to dismantle them to allow a smooth movement of the couch. For stationary sofas, however, you can only remove the feet.

How Do You Separate A Lazy Boy Sectional?

You can separate a Lazyboy sectional by lifting one section from the latches while the other is held motionless. That applies where the latch system slips one side into the other.  Where the system slides together onto the latch, pull or push the section until you detach the sectional. To have it easier and quicker, you could ask for an assistant. 

How Do You Adjust The Tension On A Lazyboy Recliner?

You adjust the tension on a Lazyboy recliner by turning the thumbwheels or the wingnuts clockwise or counterclockwise. Move them clockwise to increase the tension and anticlockwise while you wish to reduce the tension. Make a quarter move each turn and do so on both sides to ensure balanced tension throughout.

How Long Does The Lazy Boy Recliner Last?

A Lazyboy recliner has an average lifespan of 7 to 10 years. However, you can have your recliner for a longer time. Your chair can last for up to 20 years, depending on how well you take care of it. Furthermore, your Lazyboy model has a warranty that guarantees you replacement or repair if need be. 

Is A Lazyboy Sectional Recliner Good For A Small Room?

A Lazyboy Sectional recliner is good for a small room. Why? It maximizes your small area! Unlike the single-piece furniture seats that require space between them, a sectional model has a continuous seating option. Thus, it offers more sitting areas than separate sofas.  

Wrap Up

I’m sure this article is worth your time. You can now dismantle your Lazyboy recliner comfortably and do the necessary maintenance tasks. Also, you don’t have to worry about repositioning your chair. When you take it apart, it becomes easy to relocate it. 

This write-up takes you through the moving journey. The simple steps discussed here can help you to transport your recliner safely. 

And once you get to your chair’s new location, you can re-assemble it with ease under the guidelines provided towards the end of this article.

Author

  • Andrew Smith

    Andrew Smith is the founder of CozySeating, is a father of 2, and an engineer from one of the leading furniture stores in the country. Due to his 10 years of experience, he has proved to be the best person to offer advice to clients regarding different seating furniture based on their needs and performance. Besides, he is a specialist in product reviews and always keeps up with the current trends in the market.

Leave a Comment

Subscribe
Notify of
guest
0 Comments
Inline Feedbacks
View all comments