Herman Miller Aeron Vs Steelcase Leap

by Andrew Smith| Last Updated: November 30, 2022

Disclosure: This site is reader-supported & contains affiliate links. We may earn a commission through products purchased using links on this page. Learn more

Herman Miller Aeron Vs Steelcase Leap

When searching for quality and comfortable office chairs, you cannot avoid the Herman Miller Aeron vs. Steelcase Leap comparison. 

It’s a debate that has been on for some time now. In this post, I’ll make a detailed comparison of the two brands and help put the debate to rest. 

When you look at the two chairs from these renowned brands, you’ll notice a clear difference in the design. 

Both brands offer 12 years warranty with free returns, and the product is shipped to you fully assembled. 

They are both supportive and comfortable, but one has a slight edge over the other. Continue to read this Herman Miller Aeron vs. Steelcase Leap detailed review post to help you make an informed decision. 

Table of Contents

Herman Miller Aeron Vs Steelcase Leap: Which One Should I Choose?

Many things set one brand apart from the other, and they also share some similarities. This is in terms of design, adjustment, material, build quality, ergonomic design, and seat comfort. 

I will explicitly explain these features as I compare these products. It’ll help you make a sound decision.

So, continue reading.


The Herman Miller Aeron chair has height adjustability for both armrests and the seat. The same thing goes for Steep Leap. The adjustment can either be backward or frontward. 

The difference between these chairs is that you cannot add a headrest for Herman Miller Aeron, while that offer is available for Steep Leap.


It’s clear, like broad daylight, that Steep Leap is the right choice when you consider adjustability. Adding a headrest will surely increase your support and comfort. 


Of course, the material is a crucial consideration if you desire comfort when choosing an office chair. Looking at the chairs’ fabric at close quarters, you’ll notice they are not the same. 

Aeron is made with the best mesh material to ensure you stay cool and comfortable all day long. The mesh is highly breathable and offers unfettered air circulation around your spine.

On the other hand, the Steelcase Leap is made with 100% polyester material and well-padded for utmost comfort. The way fabric covers the padding makes breathability a bit difficult.   


Based on the material, Aeron is the right option. This is because the breathability offers superb comfort. It’s perfect, especially if you live in a warmer climate. 

Build quality

There is no doubt that these two products are the best for office chairs. They are built with durable components for long-lasting comfort. 

The Aeron office chair is built with rigid plastic components, solid steel, and molded aluminum.  

All the components are correctly fitted, and it moves smoothly with the kind of ease that improves your productivity. 

For Steelcase Leap, it is a bit different. This is because the chair is made of top-quality plastics to make it light and flexible.

 The plastic design makes for easy movement. It’s firmly fitted without any wobbling components.  


Although both products are robust, Aeron has better build quality than Steelcase Leap. Its steel and aluminum construction makes it extremely strong to withstand everyday use. 

Ergonomic design

Any office chair worth its salt should have the proper support for the human body. This includes comfort and Proper sitting posture

Both chairs offer exceptional support and comfort when it comes to the Steelcase Leap v2 vs. Herman Miller Aeron debate.  

Steelcase Leap has adjustable arms, seat depth, lumbar support height adjustment, firmness control for the lower back, five positions recline lock, and a well-upholstered seat and back.

All of these help the chair to support your spine and posture all around. It’s also well-cushioned so that you don’t feel any discomfort even if you sit on it for a more extended period. 

Aeron supports the spine with its PostureFit feature. It has two pads that flex separately. You can adjust it to conform to the curve of your spine. 


The winner of the Steelcase Leap vs. Herman Miller Aeron comparison in the ergonomic design category is Steelcase Leap. 

It doesn’t matter if you’re reclining backward or frontward; the chair supports you and offers exceptional comfort while you move.  

Seat comfort

 After conducting an extended Herman miller Aeron vs Steelcase leap test for seat comfort, I realized that both chairs don’t give you seat bites and fatigue. But one is more comfortable than the other.  

For Aeron, the seat is made with Pellicle mesh upholstery. The mesh gives you a nice feel. The chair offers a firm seating experience, but the drawback is that it is not padded. 

The Steelcase Leap offers a better seating experience. The seat is well-padded and not overly done too. With the padding, you are sure to have a good time. 


You don’t need a soothsayer to tell you that the Steelcase Leap chair offers impressive seat comfort. This is because the padding makes you want to sit for long. The padding also increases your comfort.  

Leap Vs Aeron: Pros and Cons

It doesn’t matter the model you select, both brands have pros and cons. So, let’s take a look at some of them. 

Steelcase Leap: What I like

Steelcase Leap: What I don’t like

Herman Miller Aeron: What I like

No products found.

Herman Miller Aeron: What I don’t like

Factors To Consider When Choosing Herman Miller Aeron vs. Steelcase Leap


If you are looking for an aesthetically designed office chair related to Steelcase Leap vs. Aeron, then this is worth reading. 

Aeron has ergonomic curves with smooth edges, and the chair looks appealing with the mesh design. You can see through the framework of the chair through the mesh.

The thick frame supports the back of the chair very well. The chair looks alluring with an aluminum frame and satin finish. 

The colors are available in black, carbon, and mineral. Any of these colors can blend with any office environment. 

Steelcase Leap on the other hand comes in very bright colors. So, if you have an office that’s looking drab, you can brighten it up with this Leap chair. It’s available in a variety of colors.

It is made with polyester material that makes the seat and back very smooth and soothing to the skin. 


This is the main reason you are buying an office chair in the first place. It should be able to offer you enough support and comfort so you can work efficiently. 

The two chairs are designed with ergonomics in mind. They feature an S-shaped backrest, seat depth, height control, tilt tension, and recline angle. 


There is no point in changing your office chair every year. This is where durability comes in. I can tell you that both chairs are durable. 

Both models come with solid and durable casters and frames. They have rugged 2.5-inch nylon casters with impressive wheelbase. 

Aeron is built with plastic, steel, and aluminum components to make it a chair that can withstand everyday usage.

Steelcase Leap is made chiefly with strong plastic components with solid support from the connecting steel to the base.

You will like the build quality of Aeron coupled with the fact that it’s light. Leap is also robust despite being constructed primarily of plastics. But it’s heavy.


Does Steelcase Leap Vs. Aeron Offer Any Warranties?

Yes, both brands offer 12 years warranty with free returns.

Is The Chair Assembled Before Being Shipped?

Yes, the chair is fully assembled before being shipped.


I have come to the end of the Herman Miller Aeron vs. Steelcase Leap review. I hope the debate can rest here. After reading the review, you can choose a chair that meets your needs from these two brands. 

They are both ergonomic and quality chairs. But I recommend the Steelcase Leap office chair for its incredible comfort and support. I cannot also overlook the fact that Aeron is within budget.


  • Andrew Smith

    Andrew Smith is the founder of CozySeating, is a father of 2, and an engineer from one of the leading furniture stores in the country. Due to his 10 years of experience, he has proved to be the best person to offer advice to clients regarding different seating furniture based on their needs and performance. Besides, he is a specialist in product reviews and always keeps up with the current trends in the market.

Leave a Comment

Notify of
Inline Feedbacks
View all comments